EnerSys OutBack POWER Mojave OGHI8048A, Руководство оператора

Страница: 13 / 116

900-00275-01-001 Rev A
13
User Interface
Accessing the User Interface (UI)
The Mojave inverter’s web-based user interface allows monitoring and programming of all items.
It can be accessed using a web browser once a local area network connection is established.
The following information assumes local access. For remote access using the OPTICS RE site,
see page 28.
Check the tablet, smartphone, or other device that will be used for access. A new wi-fi connection
will appear after power-up. It appears as “Mojave-xxxx” and incorporates part of the inverter’s serial
number. Connect to the device. When prompted for a wi-fi password, the password consists of the
last eight digits of the inverter’s serial number. (See page 34 for serial number location.) In a new
browser window, enter the inverter’s IP address, which is 192.168.2.2. This will open the UI.
Figure 2 User Interface
NOTE:
Upon initial UI access, an overlay will appear. The viewer can use it to “walk” through
available screens and options. Buttons will appear for the
P r e v i o u s or N e x t screen.
Views
Tabs
System
Status
Tab Data
Example of computer UI
Example of
smartphone UI