EnerSys OutBack POWER Mojave OGHI8048A, Руководство оператора

Страница: 22 / 116

22
900-00275-01-001 Rev A ©2021 OutBack Power. All Rights Reserved.
User Interface
Generator Tab
Figure 8 User Interface (Generator tab, STATUS view)
This tab shows information on the inverter’s connection to an AC generator. This includes the status
of automatic generator starting (AGS), if used. The first item is generator
Status :

Warming Up — generator is running without connecting to the inverter. The generator relay is open.
The Timer is counting down the warmup time before connection.

Connected — generator power is accepted for use. The generator relay is closed. The Timer is
counting the generator’s running time.

Disconnected — voltage is present at the G
EN
terminals, but the power is unacceptable or was
manually disconnected. The generator relay is open.

Cooling Down — generator is running without connecting to the inverter. The generator relay is
open. The Timer is counting down the cooldown time before stopping the generator.

Dropped — generator power was manually disconnected in the Actions Menu . The generator relay
is open.

Error — the inverter has detected a critical problem at the G
EN
terminals. The generator relay is open.

Not Available — no voltage (or minimal voltage) is detected at the G
EN
terminals. The generator
relay is open.
NOTE
: When a generator
is in the Status of Connected
(see below), the generator and
grid icons will switch places.
(Compare this image to
previous tabs.)