Endress+Hauser Turbimax CUE21, Руководство по эксплуатации

Страница: 17 / 40

Turbimax CUE21 / CUE22 Operation options
Hauser 17
A0026267
 7 Access protection enabled: Prompt to enter code
‣
If access protection is enabled:
Enter the code 333.
 You can access the CAL or CONFIG menus.
The access code cannot be changed.
6.2.2 Menu structure
The device has three operating modes that can be selected using the key:
• AUTO
Standard operating mode for displaying current measured values
• CAL
Calibration mode for performing calibration procedures
• CONFIG
Setup mode for configuring customer-specific settings
Configuration menu (CONFIG)
The configuration menu is split into several submenus. The following submenus are
available:
• Output selection
• RS-485 port configuration
• Alarm configuration
• Security access configuration
• Offset configuration
• Advanced settings
The extended settings are grouped together to prevent them from being modified
accidentally:
– Response speed
– Displayed resolution
– LCD backlight brightness
– Displayed units
– Ultrasonic cleaning
– RS485 parameters
– Desiccant alarm
For a detailed explanation of the submenus, see the "Instrument configuration"
section. (→  19)
工程师电话（微信）15915717832