Endress+Hauser Silometer FMC 672 Z, Инструкция по установке и эксплуатации

Страница: 21 / 64

3 Controls
This Chapter describes how the Silometer FMC 672 Z/677 Z transmitters are operated.
It is divided into the following sections:
•
Commutec operating matrix
•
Configuration and display: Silometer FMC 672 Z
•
Configuration and display: Silometer FMC 677 Z
3.1 Commutec operating matrix
All functions, including the analogue outputs and relay switch points are configured via
the operating matrix, see Figs 3.1 and 3.2:
•
Each field in the matrix is accessed by a vertical (V) and horizontal (H)
position which can be entered at the front panel of the FMC 672 Z, by the
Commulog VU 260 Z and via a ZA 67
…
computer gateway.
•
For information on ZA 67
…
operation see the operating manual BA 054E and
Technical Information sheet »Commutec Operating Program« TI 113.
A matrix card, reproduced at the back of this manual, is delivered with the Silometer
FMC 672 Z/677 Z transmitter.
Current matrix position
Silometer FMC 672 display
Parameter at current matrix
position
Pressed together
Move to V0H0
Move H0
…
H9, H0
Move V0
…
V9, V0
BA064E20
Fig. 3.1:
Silometer FMC 672 Z
Parameter matrix operation with
function of V and H keys.
The complete matrix has 10 x 10
fields, although not all are used
Diagnostics key -
press to display error
message when icon
blinks
Escape key - press to
move to field 00
Entry key - press to call
or quit parameter entry
Matrix selection keys -
press to move about matrix
BA064E21
Commulog display
Parameter
Bar chart of
analogue signal
Fig. 3.2:
Silometer FMC 6772 /672 Z
Commulog display and key
functions.
The Tag No. and measurement
units are entered in the VA level
which can be accessed by the
Commulog or ZA 67
…
interface
only
Silometer FMC 672 Z/677 Z Chapter 3: Controls
19