Endress+Hauser Proline Promag L 800, Краткое руководство по эксплуатации

Страница: 11 / 56

Proline Promag L 800 Incoming acceptance and product identification
Hauser 11
4.2 Product identification
It is possible to identify the measuring device in the following ways:
• Using the nameplate specifications
• Using the order code with a breakdown of the device features on the delivery note
• By entering the serial number on the nameplates into the W@M Device Viewer
(www.endress.com/deviceviewer): All the information pertaining to the measuring device is
displayed.
For an overview of the scope of the Technical Documentation provided, please see:
The W@M Device Viewer : Enter the serial number on the nameplate
(www.endress.com/deviceviewer)
A0014053
Fig. 2: Example of nameplate
1
Order code
2 Serial number (Ser.No.)
3 Extended order code (Ext. ord. co.)
Detailed information on the breakdown of the nameplate data:
Operating Instructions for the device on the enclosed CD-ROM
4.2.1 Symbols on the device
Order code:
Ext. ord. cd.:
Ser. no.:
1
2
3
Symbol Meaning
#
Warning!
"Warning" indicates an action or procedure which, if not performed correctly,
can result in injury or a safety hazard. Comply strictly with the instructions and
proceed with care.
A0011199
Protective ground connection
A terminal which must be connected to ground prior to establishing any other connections.
A0011194
Reference to documentation
Refers to the corresponding device documentation.