Endress+Hauser Proline Promag L 800, Краткое руководство по эксплуатации

Страница: 53 / 56

Proline Promag L 800 Commissioning
Hauser 53
9.4 Switching on the measuring device
Once the batteries have been inserted, the measuring device is switched on via the DIP switch →
 40. This applies both to battery-powered operation and for operation with an optional power
supply since the device is already powered via the backup battery B1 in this case. Once the device
is switched on, press the Enter key for > 1 second, and the measuring device is started.
#
Warning!
Only switch on the external power supply (optional) once the post-installation and
post-connection checks have been performed successfully for the device.
After a successful startup, the onsite display switches automatically from the startup display
screens to the measured value display.
A0017030
Fig. 33: Example: display screens when the measuring device is started
1
Name of measuring device, firmware version
2 Date and time entered via the operating keys
(entry also possible at a later date) →  48
3 Reads the information from the SD card
4 Displays the memory capacity and the current settings of the SD card
5 Displays any pending errors (if present)
6 Displays general information
FW 5.03.0300
Hauser
Promag 800
1
Free:
Size:
Cluster:
Buffer:
1979.38
1943.37
32
1056
MB
MB
KB
B
4
2011/07/01
BOARD T.:
ANT.SIG: 19 : 45
+25°C
[ OFF ]
ALARM 1/3:
B3 LOW
6
Set date/time
2012/02/02 00:00
2
Wait . . .
Reading SD cart
information
This will take
some time
3
ERROR 0800
5