Endress+Hauser Proline Promag L 800, Краткое руководство по эксплуатации

Страница: 51 / 56

Proline Promag L 800 Operating options
Hauser 51
8.3.3 Changing parameters
1. Press and hold the
Y
key for 2 seconds and then release.
Ã
The device leaves the standby mode and the measured value or status display screen
appears.
2. Press
Y
once.
Ã
The main menu is displayed.
Note! The Quick Start menu is displayed during initial commissioning or if the "Quick start"
parameter (QSTME ) is set to ON (default value). In such instances, use
V
to select the
"Main menu" option and enter the main menu.
3. Press
V
to select the desired parameter group.
4. Press
Y
to confirm the selection.
Ã
The parameter group is called up.
5. Press
V
to select the desired parameter.
6. Press
Y
to confirm the selection.
Ã
The parameter is displayed.
7. Use
V
to change the option selected or the value.
Note! In the case of some parameters, it is possible to make several settings within the
parameter (example Tot1MU).
8. Press
Y
to confirm the selection.
Ã
The option or value selected is accepted.
8.3.4 User roles and related access authorization
Detailed information on user roles and related access authorization
Operating Instructions for the device on the enclosed CD-ROM
8.4 Access to the operating menu via the operating tool
8.4.1 Config 5800 operating tool
Config 5800 is a software operating tool which is used to configure and operate the Promag 800
measuring device. The measuring device does not support any other operating tools.
Detailed information on Config 5800 operating tool:
Operating Instructions for the device on the enclosed CD-ROM