Proline Promag L 800
Electrical connection
Hauser
33
7.2.2 Connecting the inputs and outputs
1.
Open the housing cover.
– Release the four screws with a Phillips head screwdriver.
– Lift the housing cover slightly and tip it to the left.
Two flexible fasteners secure the housing cover to the housing.
2.
Push the cable through the cable entry
To ensure tight sealing, do not remove the sealing ring from the cable entry.
3.
Strip the cable ends over 6 mm (0.24 inch).
In the case of stranded cables, also attach wire end ferrules.
4.
Connect the cables in accordance with the terminal assignment. When connecting the
cable shield to the ground terminal, observe the grounding concept of the facility.
Rigid conductors or flexible conductors with wire end ferrules can be inserted directly into
the terminal without pressing on the wire release.
A0017026
Fig. 20: Connecting the outputs
1
Output 1
2
Output 2
3
Input 1
5.
Fit the cable anchorage, firmly tighten the cable glands and secure the housing cover
again.
17
16
15
14
10
9
8
7
6
5
13
12
11
4
3
2
1
–
2
+ –
+
1
–
+
3
Inputs
Outputs
Terminal
Connection
Terminal
Connection
5
Input 1 (+)
14
Shield, output 1 and 2
6
Input 1 (–)
15
Output 1 (+)
16
Output 2 (+)
17
Output 1 and 2 (–)
Содержание Proline Promag L 800
Страница 55: ...Proline Promag L 800 Commissioning Endress Hauser 55...
Страница 56: ...www addresses endress com...
