Endress+Hauser Proline Promag L 400 HART, Руководство по эксплуатации

Страница: 92 / 166

Commissioning Proline Promag L 400 HART
92 Hauser
Decimal places 2 A measured value is specified in
the parameter
Value 2
display .
Select the number of
decimal places for
the display value. • x
• x.x
• x.xx
• x.xxx
• x.xxxx x.xx
Decimal places 3 A measured value is specified in
the parameter
Value 3
display .
Select the number of
decimal places for
the display value. • x
• x.x
• x.xx
• x.xxx
• x.xxxx x.xx
Decimal places 4 A measured value is specified in
the parameter
Value 4
display .
Select the number of
decimal places for
the display value. • x
• x.x
• x.xx
• x.xxx
• x.xxxx x.xx
Display interval - Set time measured
values are shown on
display if display
alternates between
values. 1 to 10 s 5 s
Display damping - Set the reaction time
of the local display to
fluctuations in the
measured value
caused by process
conditions. 0 to 999 s 0 s
Header - Select header
contents on local
display • Device tag
• Free text Device tag
Header text The Free text option is selected
in the Header parameter.
Enter display header
text. Max. 12 characters
such as letters,
numbers or special
characters - - - - - - - - - - - -
Separator - Select decimal
separator for
displaying numerical
values. • . (point)
• , (comma) . (point)
Backlight - Switch the backlight
of the local display
on and off. • Disable
• Enable Enable
10.6 Simulation
The Simulation submenu enables you to simulate, without a real flow situation, various process
variables in the process and the device alarm mode and to verify downstream signal chains (switching
valves or closed-control loops).
Navigation path
"Diagnostics" menu
®
Simulation
The parameters displayed depend on:
• The selected device order (
®
ä 33)
• The set operating mode of the pulse/frequency/switch outputs (
®
ä
70)
Structure of the submenu
Simulation
®