Endress+Hauser mypro CLD 431, Руководство по эксплуатации

Страница: 5 / 54

1 General information
1.1 Symbols used
Warning:
This symbol alerts to hazards which
may cause serious injuries as well as
damage to equipment if ignored.
Note:
This symbol indicates important
items of information. Ignoring this
information may result in malfunction.
1.2 Storage and transport
The packaging material used to store or trans-
port the instrument must provide shock pro-
tection. Optimal protection is provided by the
original packaging materials. Conformance with the ambient conditions
(see Technical data) must be assured.
1.3 Unpacking
Verify that the packaging and contents are
undamaged! Inform the post office or freight
carrier of any damage. Damaged merchan-
dise must be retained until the matter has
been settled.
Check that the delivery is complete and
agrees with the shipping documents and your
order (refer to nameplate for type and variant).
The delivery includes:
MyPro CLM 431:
• Measuring transmitter MyPro CLM 431
• Housing fastening elements
• Prepared cable (depending on version)
• Operating instructions BA 202C/07/en
• Certificate of conformity
(depending on version)
MyPro CLD 431:
• Measuring transmitter MyPro CLD 431
with measuring cell CLS 12
• Operating instructions BA 202C/07/en
• Certificate of conformity
(depending on version)
Keep the original packaging materials for
future storage or shipping of the instrument.
If you have any questions, consult your sup-
plier or the Hauser sales agency in
your area (see back cover of these operating
instructions for addresses).
1.4 Packaging and disposal
Package the assembly properly for reuse at a
later point in time. Optimal protection is
provided by the original packaging materials. Observe local regulations for disposal.
General information mypro CLM 431 / CLD 431 conductive
2 Hauser