Endress+Hauser dosimass, Руководство по эксплуатации

Страница: 51 / 58

Dosimass Appendix - Function description
Hauser 51
11.8 Function group SENSOR PARAMETER
Function description
SENSOR PARAMETER function group
All sensor data, including calibration factor, zero point, nominal diameter, etc. are set at the factory. All the
sensor's parameter settings are saved on the DAT memory chip.
K-FACTOR Use this function to display the current calibration factor for the sensor.
Factory setting:
Depends on nominal diameter and calibration
ZEROPOINT Use this function to display the current zero-point correction value for the sensor. The
value can be changed with an entry.
Display:
–99 999 to +99 999
User input:
–99 999 to +99 999
Factory setting:
Depends on the calibration
NOMINAL DIAMETER Use this function to display the nominal diameter for the sensor.
Factory setting:
Depends on the size of the sensor
C0 Use this function to display the actual density coefficient C0.
C1 Use this function to display the actual density coefficient C1.
C2 Use this function to display the actual density coefficient C2.
C3 Use this function to display the actual density coefficient C3.
C4 Use this function to display the actual density coefficient C4.
C5 Use this function to display the actual density coefficient C5.
MIN. TEMPERATURE
MEASURED Use this function to display the lowest fluid temperature measured.
MAX. TEMPERATURE
MEASURED Use this function to display the highest fluid temperature measured.