Troubleshooting
multi EA 5100
104
Error
code
Error message/cause
Remedy
411
415
420
Syringe pump: Pump step not permitted
Syringe pump: Command error
Syringe pump: incorrect type
Communication error
Acknowledge message
Initialize
13.3 Initializing the basic module and the system components
Initialization of a measuring system establishes communication between the measuring
system and the computer. The multiWin program differentiates between a standard ini-
tialization and a basic initialization.
With standard initialization, only the system components active before the last shut-
down of multiWin are queried and the method last active is loaded.
The basic initialization, on the other hand, is more thorough and tests all connected sys-
tem components activated in the multiWin program in the window. The basic initializa-
tion must always be performed in the following situations:
¡
Connection of new system components
¡
Recognition of system components which were shut down or were not connected
during the last initialization
¡
Fault in the communication between the measuring system and the computer
Performing the basic initializa-
tion
Basic initialization is always performed if the Device - edit window was opened and ex-
ited via [OK]:
}
Select the Device |Device - edit menu item.
}
Make any necessary changes and exit the Device - edit window via [OK].
}
Click on [Initialize analyzer] in the main window.
ü
The system is initialized and the method last used is activated. If the initialization
was successful, the [Start Measurement], [Activate method] and possibly the
[Start calibration] buttons are displayed in the main window.
Standard initialization
Click on the [Initialize analyzer] button in the main window. Alternatively, select the Sys-
tem |Initialize menu item.
