Page 10
VSR-1200 Hardware Reference Module, Document 2
• If you are configuring a virtual Logical Port, the Virtual Logical Port menu is
displayed. Continue to
Step 3
.
3
On the RDU Port menu or the Virtual Logical Port menu, select the port to configure.
❖
The Logical Port Attribute menu appears.
4
To modify the port’s default settings, see the following:
•
Section 2.5.3.1, Protocols
•
Section 2.5.3.2, DHCP Settings
(only for the WAN and LAN ports)
•
Section 2.5.3.3, Dial Backup Settings
2.5.3.1
Protocols
To change the protocol that a port uses, or to modify attributes of a port’s protocol, do the
following on the Logical Port Attribute menu (see
Section 2.5.3, Ports
):
1
If you wish to change the protocol the port uses, do all of the following:
a
Select Undefine Current Logical Port.
b
Select Protocol.
c
On the Logical Port Protocol Selection menu, select the protocol you want this port to
use. Go to Step 2
a
.
2
To modify parameters in the port’s protocol, select Protocol.
❖
The protocols available for the port are displayed.
a
On the protocol configuration menu, select and change parameters to work in your
network.
Logical Port Protocol Mapped To Port Interfaces
------------------------------------------------------------------------
1) UNDEFINED
2) UNDEFINED
3) UNDEFINED
4) UNDEFINED
5) UNDEFINED
6) UNDEFINED
7) UNDEFINED
8) UNDEFINED
9) UNDEFINED
10) UNDEFINED
11) UNDEFINED
12) UNDEFINED
13) UNDEFINED
14) UNDEFINED
15) UNDEFINED
16) UNDEFINED
17) UNDEFINED
P) More Ports...
Enter Port :
