Page 24
VSR-1200 Hardware Reference Module, Document 2
c
Set a Default Priority for IP packets that do not match any entry in the table.
For more information, see
IP Quality of Service
in the
Routing
Module.
2.5.5.3
Network Address Translation
You can use the BANDIT products for network address translation (NAT).
If your connections will include VPNs across satellite networks, the BANDIT device will use
selective layer encryption. Before configuring the NAT Table, read
Section 2.5.4.3, Selective
Layer Encryption in VPNs
.
To use network address translation, do the following:
1
On the IP Routing Configuration menu, select Network Address Translation.
2
On the Network Address Translation menu, do the following:
a
Select a NAT configuration scheme.
b
Enable and configure the NAT configuration scheme according to your network plan—
e.g., for masquerading, or for a NAT table.
For more information, see
Network Address Translation
in the
Address Translation
Module.
2.5.5.4
Firewall
The default settings for the VSR do not use the firewall feature. If you wish to configure the
firewall, do the following.
1
On the Main Menu, select Typical Configurations.
2
On the Typical Configurations menu, select Configure Firewall.
3
On the Configure Firewall menu, configure the policy table, NAT profiles, and IP
interfaces for your network’s dynamic firewall.
For more information, see the
The BANDIT™ Device as Firewall
in the
Routing
Module.
2.5.6
Simple Network Management Protocol
If you wish to use Simple Network Management Protocol (SNMP) with the VSR, do the
following to configure the device’s built-in SNMP agent:
1
On the Main Menu, select System Administration.
Source Src
Destination Dest
# Address Port Address Port Protocol Path Name Priority
--- --------------- ------ --------------- ------ -------- ---------- ----------
1 * * * * * * Immediate
* * * *
* * * *
Add, Modify, Insert or Delete an Entry? - (A/M/I/D) :
