Page 14
VSR-1200 Hardware Reference Module, Document 2
Note:
Although all VPN profile records have all fields, the screen displays only the
fields used in the keying specified—autokeying (IKE) or manual. (The BANDIT VPN
products do not use manual keying in normal operation. If you want a VPN device to
use manual keying, contact your Encore Networks representative.)
b
Type the line number of the field whose value you wish to change.
❖
If you select a phase proposal, a menu similar to the following is presented. Go to
Section 2.5.4.1.1, Configuring Phase Proposals for IKE Autokeying
.
❖
If you select any other field, the field is presented, so that you may enter a new value.
c
Type the new value for the field, and press Enter.
❖
The new value is accepted, and the selected profile is displayed with the new value.
d
Do one of the following:
• If you wish to modify another field’s value, return to Step 3
b
.
• When you have finished modifying this profile, press Escape to save the new values.
❖
The following prompt is displayed:
e
Do one of the following:
• To save the changes, press y.
• To discard the changes and keep the prior information, press n.
❖
Whether you answer y or n, the VPN Profile Table is redisplayed. Return to
Step 2
.
4
To add a profile to the VPN Profile Table, do all of the following:
a
Type the line number of the existing profile you wish to copy as a model for the new
profile.
b
Type the name for the new profile, and press Enter.
Note:
You may use profile names that are meaningful in your network—for example,
Springfield Office
, or
Business Traveler 9
.
❖
The software adds the new profile to the VPN Profile Table.
Phase 1 Proposals
------------------------
1) Proposal 1: Preshared - DH GROUP G2 - DES - HMAC-MD5
2) Proposal 2: Preshared - DH GROUP G2 - DES - HMAC-SHA1
3) Proposal 3: Preshared - DH GROUP G2 - 3DES - HMAC-MD5
4) Proposal 4: Preshared - DH GROUP G2 - 3DES - HMAC-SHA1
Enter your choice:
Do you want to keep your change? (Y/N):
