VSR-1200™ and RDU™ Installation and Quick Configuration Guide
Page 23
3
See the following:
•
Section 2.5.5.1, IP Routing
•
Section 2.5.5.2, IP Quality of Service
•
Section 2.5.5.3, Network Address Translation
•
Section 2.5.5.4, Firewall
2.5.5.1
IP Routing
To use the VPN feature to its capacity, you must configure the device’s IP routing. Do the
following:
1
On the IP Routing Configuration menu, select the IP Routing Method you wish to use
(RIP or Static).
2
On the IP Routing Configuration menu, do the following:
a
If the IP routing method is RIP, select and configure RIP Routing. Follow the
procedures for RIP routing in
Section 2.1.2, RIP Routing
, of
IP Routing in the BANDIT™
Products
.
b
If the IP routing method is Static, select and configure Static Routing. Follow the
procedure for static routing in
Section 2.1.3, Static Routing
, of
IP Routing in the
BANDIT™ Products
.
For more information, see
IP Routing in the BANDIT™ Products
.
2.5.5.2
IP Quality of Service
To use the VPN feature to its capacity, you must configure the device’s IP Quality of Service.
Do the following:
1
On the IP Routing Configuration menu, select IP Quality of Service.
2
On the IP Priority menu, select Prioritization.
3
On the IP Quality of Service menu, do the following:
a
Select Status, and Enable IP quality of service.
b
Select Quality of Service Table, and configure entries in the table.
Entry IP Address Net Mask Gpt Name Next Router Mode MTU
---- --------------- -------------- ------------ -------------- ------ ----
1 192.168.169.1 255.255.255.0 MODEM 0.0.0.0 Off 1500
Add, Modify, or Delete an Entry? (Enter A, M, or D):
Entry IP Address Net Mask Next Router Path Name Hops
1 1.2.3.4 255.0.0.0 Unnumbered a 1
Add, Modify, or Delete an Entry? (Enter A, M, or D):
