Page 22
VSR-1200 Hardware Reference Module, Document 2
Figure 2-9. Detail of Record 3 in IP Policy Table,
for SLE over Satellite Networks
Figure 2-10. Detail of Record 4 in IP Policy Table,
for IPsec VPN Traffic without SLE
Note:
For VPN with SLE over satellites, there must be another BANDIT product using VPN
with SLE on the other side of the network, handling SLE for the remote side of the
connection.
Over ground-based networks, the BANDIT VPN products use non-SLE software and can
interoperate with non-BANDIT IPsec VPN gateways. For details of IPsec interoperability,
see
VPNC Scenario for IPsec Interoperability
.
2.5.5
IP Configuration
This section discusses additional IP components you must configure in order to use the VSR.
1
On the Advanced Configurations menu, select Routing.
2
On the Routing menu, select IP Routing.
❖
The IP Routing Configuration menu appears.
3) Source Address Low : *
Source Address High : *
Source TCP/UDP Port Low : *
Source TCP/UDP Port High : *
Destination Address Low : *
Destination Address High : *
Destination TCP/UDP Port Low : *
Destination TCP/UDP Port High : *
Protocol/Flags : *
Path Name : *
Incoming/Outgoing : *
Filtering Action : Allow
VPN Profile name : N/A
Description : H-1
4) Source Address Low : *
Source Address High : *
Source TCP/UDP Port Low : *
Source TCP/UDP Port High : *
Destination Address Low : *
Destination Address High : *
Destination TCP/UDP Port Low : *
Destination TCP/UDP Port High : *
Protocol/Flags : *
Path Name : *
Incoming/Outgoing : *
Filtering Action : Allow
VPN Profile name : N/A
Description : I-Allow ALL
