Page 26
VSR-1200 Hardware Reference Module, Document 2
3
Regardless of screen instructions, do not type anything until you see the banner:
BANDIT, ENCORE NETWORKS INC
. Then press Enter.
❖
The Main Menu is displayed.
2.8
Exiting a Session
After the software has been configured, save (write) the configuration. Then exit the session
before disconnecting the PC, so that communication is not disrupted.
Caution:
Before you exit, make sure you save (write) the configuration. Otherwise, the
changes you configured will be lost. See
Section 2.6, Saving (Writing) the Device’s
Configuration
.
To exit the session, do the following:
1
On the Main Menu, select Exit Session.
❖
The following prompt is displayed.
2
Select Yes.
Note:
If the configuration has not been saved, the device asks you whether it should
save the new configuration. Answer Yes (or No, if you prefer not to save the
configuration).
❖
The system notifies you that it is ending the session.
Note:
To reconnect to the device and start a new session, press Enter.
❖
The terminal’s connection to the BANDIT starts up, and the BANDIT’s Main Menu is
displayed.
Are You Sure? :
Ending Session...
!
