59 / 81
Finally,
press “
OK
” to validate.
!
With some keypad code sequences, it can be necessary to first press the
keypad key and the modifier afterwards.
When the window closes, the key codes entered appear in the keystroke text box, as
you can see in the picture below.
To enter the explanation of this keystroke,
press the button “
Explanation/Keystrokes
”
to change it to Keystrokes and then click the keystroke text box where you entered the
key codes and write the comment you want. The explanation info is not necessary, it is
only a help to remember the keystroke action.
Finally, you can check the keystroke operation. For that, click the
CLEAR
button
associated to the
Output
text box to clear its content and press the “
Trigger 1
” switch
in the stick and check that the key codes entered are shown in the
“
Output
” text box.
To send the keystrokes, it is necessary to have the
Keystrokes
button
ON
. If at any
time the keystrokes are not sent to the
Output
text box, please check this.
