56 / 81
1 and 48 are active. In DCLICK mode, with this sequence, you will only activate the DX
button 48. To activate the DX button 1, you need to press the button with a double click
and although you move the button with the center pressed, the status will not change.
So, we
suggest using mainly this mode
.
ADJUSTABLE LEDS LIGHTING LEVEL
This feature allows adjusting the intensity level of three status LEDs, independently of
the BLE status (connected or disconnected) and of the LED intensity (Low and High
levels).
The settings are shown numerically in text boxes and the selection is done with
Up/Down indicators. The setting values go from 0 to 250.
SWLED FUNCTION
With this feature, the three status LEDs of the grip show the switches position when
pressed. The selection is made through an
ON/OFF
button.
Left:
Down:
Right:
Up:
on - off - off
off - on - off
on - on - off
off - off - on
In
OFF
mode, the status LEDs show the slot number in binary mode as we mentioned
in the “
How the F18CGRH works
” section.
In
ON
mode, the status LEDs show also in binary mode the last hat switch position
pressed; the possible binary codes are shown above. This mode allows testing and
verifies if a switch is working properly.
Keystrokes and Explanations
As we mentioned previously, the F18CGRH is a composite device with a
Game
Controller
for the DX axes and DX buttons, a
Keyboard
to send programmable
keystrokes and a digital
Mouse
.
We have seen before how to configure and adjust the DX axes and buttons of Game
Controller and now we will see how to configure the keystrokes. The program window
has an area reserved for this purpose where you can configure the 56 keystrokes of
each slot.
In the picture below, you can see in the squared area in red the controls allowing to
configure and manipulate the keystrokes. The information shown changes in function
of slot selected; in the picture, the Slot 1.
