43 / 81
8. Finally, rotate the grip at least 360 degrees over the Pitch axis until the Counter
reaches the number 299.
9. When the Counter reaches the number 299, the pairing is complete and an
informative window is displayed.
10. Click Ok to continue.
11. At this moment, the pairing is complete and you can verify in the
Axes Raw
Values
area how the value
bars work. Please, don’t pay attention to the center
positions, only to the bars movements and keep in
mind that when a value reaches the maximum the
next value is the minimum and vice versa.
12. If the movements suit you, accept the pairing by
clicking in the alert button displayed on the top of the
animation area. If you are not satisfied, repeat the
procedure. With this action, you save the new settings
of pairing in the Flash area. So the next time you turn
the system on, these settings will be active. If you
don’t click and save the settings, they remain active
until shut down (they are in the Memory area) and
next time you turn on the system, the old settings will
be loaded.
