71 / 81
and it will change to lime colour. Finally, click the
Print Active
button.
To print a selection of slots, first click the
ALL
or the
Active
button if you want to print
a selection of actives and no active slots or only active slots. Disable the undesired
slots by clicking on them to change to the red colour. Finally, press the
button.
Working offline with the F18CGRH
The application allows to work with the slots configuration without the stick connected.
It is the so-called
“
offline
” mode.
All the previous explanations are valid, with the exception that now that there is no
stick connected,
the slots configuration can’t be loaded or saved in it. It is only loaded
and saved in the computer, in the .xml file, and as the tab is shared by F-16 and F-18
grips by default the configuration shown is a F-16.
When you launch the RS_HID_DEV_TOOL and click the
“F16/F18 RH” tab, the
application will show the image below.
Only a new control is present, an Up/Down indicator to replace the rotary switch and to
allow changing the slot in use.
As with the normal operation, the F16SGRH_BACKUP file is loaded, from this starting
point, you can modify all the data you want.
When you are done, you must save the configuration in a file to recover it when
necessary.
If the stick is connected before you save the actual configuration, you will receive an
alert to save the offline configuration before the stick configuration is loaded.
