48 / 81
After closing the window, RS_HID_DEV_TOOL saves the new calibration values in
Windows. It also relocates the associated icons of minimum, centre and maximum, as
you can see here.
Now, with the calibration finished, you can check that there is a direct correlation
between the maximum, centre and minimum positions of our hardware shown with the
red and black icons and the maximum, centre and minimum DX values.
Manually configure Raw Axes
With the RS_HID_DEV_TOOL, it is possible to see and manually adjust the value of
each parameter associated to the raw axes progress bars (the Maximum, Minimum
and Center positions).
To see a parameter value, you must hover the mouse pointer over the parameter icon
and the measure will be displayed for 4 seconds under the raw axis name. After this
time, the measure value disappears, and it will be necessary to move the mouse and
put the pointer over the icon to see it again.
X axis Maximum value Y axis Centre Dead Zone value
If you want to modify a value, put the mouse pointer over the chosen icon and after a
double-click on the icon, the application opens
a window showing the “minimum”
(upper position) and “maximum” (lower position) admitted values for the selected
parameter. The active value is shown in bold, in the centre position.
Icon of
Minimum
Icon of
Maximum
Icon of
Centre
Maximum
Minimum
Centre
