LightPulse Fibre Channel PCI Host Adapter How to Guide
Page 13 of 14
file://G:\emuweb\WWWROOT\ts\fibre-channel\docs\howto pdf\nt_alpa.htm
3/28/99
3. Reboot the system if any changes were made to LUN Mapping.
4. Select a SCSI Target under the World
Wide Port Name list.
5. Click LUN Map under the list of SCSI
targets.
6. Click Add in the LUN Map pop-up
window.
7. Select a 64-bit Fibre Channel LUN then
click OK.
The format of this number is found under
the FCP standard or PLDA (Private Loop
Drive Attachment) standard. The first
number is this series will be all one's.
8. Enter the NT LUN number. This number
is self-incrementing.
Manual SCSI Mapping
From the Windows NT desktop,
1. Click Start menu, select Programs group, and select Emulex Configuration Utility.
The Configuration Utility main window opens:
Note
In the Adapter Controls section, uncheck (if
checked) the Automatically Map SCSI devices box.
Reboot the system if any changes were made to
Adapter Controls.
2. Select an adapter from the
Available Adapters list
3. Click Add Mapping under
SCSI Targets list.
4. In the displayed window,
