LightPulse Fibre Channel PCI Host Adapter How to...
Page 8 of 11
file://G:\emuweb\WWWROOT\ts\fibre-channel\docs\howto pdf\index.htm
3/28/99
copper duplex interface supports the Fibre Channel - Media
Interface Adapter specification.
Upgrade device driver
Note
It is important to remove the existing host
adapter driver before upgrading or reinstalling
a new driver.
Follow these procedures to upgrade or reinstall the device driver. Click procedure for
details. When finished, click "Return to top of page" to return to this summary.
1.
Obtain driver
- Obtain new driver from the Emulex ftp site at
ftp.emulex.com/pub/fibre
.
2. Remove driver - Procedure differs for
Windows NT 4.0
,
AIX
,
Solaris
, or
UnixWare
.
3.
Install new device driver
Obtain driver
Driver files are on the Emulex ftp server at
ftp.emulex.com/pub/fibre
.
Return to top of page.
Remove existing Windows NT 4.0 driver
The procedure is slightly different for the
SCSI
driver and
IP
driver. Refer to the proper
procedure.
Windows NT 4.0 SCSI driver
From the Windows NT desktop,
1. Click Start, select Settings, Control Panel.
2. Double click Network icon.
3. Select Adapters tab.
4. Select Emulex PCI-Fibre Channel host adapter.
5. Click Remove and Yes to confirm.
6. Click Close.
7. Reboot the computer to restart Windows NT.
Return to top of page.
