LightPulse Fibre Channel PCI Host Adapter How to...
Page 4 of 11
file://G:\emuweb\WWWROOT\ts\fibre-channel\docs\howto pdf\index.htm
3/28/99
1. Type <5> and press <Enter> to open the Maintenance menu.
2. Type <3> and press <Enter> to enable Boot BIOS.
3. Type <0> and press <Enter> to return to the previous menu.
4. Type <7> and press <Enter> to exit the lp6dutil program.
Return to top of page.
Create a DOS Boot Diskette
From MS-DOS prompt,
1. Place empty floppy disk in drive.
2. Format floppy with system files.
format a:/s
3. Copy these four files onto the floppy disk.
format.com
fdisk.exe
mscdex.exe
The CD-ROM device driver (see manufacturer’s manual)
Note
SCSI CD-ROMs can use the ASPI DOS driver or
the DOSCAM driver.
4. Create a simplified autoexec.bat file on the floppy disk and enter this line:
a:\mscdex.exe/d:
any_name
For example,
a:\mscdex.exe/d:OEMCD001
5. Create a simplified config.sys file on the floppy disk and enter this line:
a:\DEVICE=
device_driver
/d:
any_name
device_driver
CD-ROM device driver provided by
manufacturer.
any_name
This name serves as a link between autoexec.bat
and config.sys files. The same name must be used
