LightPulse LP850 Fibre Channel PCI Host Adapter Manuals Page 6 of 10
Copyright Emulex Corporation - All rights reserved, 1999
Note
An MIA is user supplied.
To attach an MIA,
1. Connect the MIA DB9 connector to the host adapter copper
DB9 connector.
2. Tighten screws carefully - do not over tighten.
3. Connect the SC connector of the fiber optic cabling to the
optical SC port of the MIA.
For more information on MIA specifications and operating instructions, consult the MIA
manufacturer’s documentation.
Supported media types
l
Multimode fiber optic cable (50/125
µ
m or 62.5/125
µ
m) with dual SC connectors,
used with short wave lasers
l
Copper duplex cabling with DB9 connectors (also called DE9)
l
Media Interface Adapter
(MIA) used to convert from fiber optic to copper, if required
(user supplied)
Host Adapter LEDs
POST conditions and results are summarized in this table.
Green LED
Yellow
LED
State
OFF
OFF
wake-up failure (dead board)
OFF
ON
POST failure (dead board)
OFF
slow
blink (1
Hz)
wake-up failure
OFF
fast blink
(4 Hz)
failure in POST
OFF
flashing
(irregular)
POST processing in progress
