LightPulse Fibre Channel PCI Host Adapter Management
Page 4 of 6
file://E:\emuweb\WWWROOT\ts\fibre-channel\docs\manage pdf\5nts_1ut.htm
3/24/99
Return to top of page.
Enable or Disable Boot BIOS
Boot BIOS is used to designate a Fibre Channel drive as the boot drive. To enable a Fibre
Channel drive as the boot drive, first enable Boot BIOS using this procedure and then refer
to the Boot BIOS section.
From the LightPulse Utility/NT main window,
1. Select the desired host adapter.
2. Expand the Category list and select Firmware Maintenance.
3. Select the Boot BIOS Firmware image.
If Boot BIOS Firmware is not listed, you will need to
download a
Boot BIOS image
.
4. Click Enable.
The Enable button toggles to Disable when Boot BIOS is enabled.
Download PCI configuration files (CFL)
This display provides information about the data in each of the configuration regions in the
Flash ROM of the selected host adapter. The user selects a region in the drop-down Region
list and the data contained in that region is displayed. Regions 5, 6 and 7 allow the user to
download PCI configuration data files to the selected region.
