Emerson Rosemount CT4400 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 106

background image

1.5

Safety precautions and conditions for safe use

WARNING

Before installing or performing any maintenance on the analyzer, read and understand the
safety information given in the preliminary information of this manual.

The analyzer described in this manual has been quality control tested and left the
manufacturer in pristine condition. To achieve the correct and safe operation of this
product, it must be transported, installed, operated, and maintained as described by the
manufacturer.

All lasers used within the analyzer are Class 1. The lasers are fully enclosed so that no
hazardous radiation is accessible under normal operating conditions. Opening the
analyzer and attempting to perform adjustments or procedures other than those specified
in this manual may result in hazardous optical radiation exposure to personnel.

The analyzer has warning labels at appropriate positions in accordance with USA 21 CFR
1040.10.

1.6

Qualified personnel

This manual provides installation, operation, and maintenance personnel with the level of
knowledge required to safely start, operate, and switch off the analyzer.

Only technically qualified personnel in the field of analysis and control who are familiar
with this manual and have been specially trained on the analyzer should install, operate,
switch off, and service the analyzer. Only qualified and trained persons have the required
specific knowledge to correctly interpret the general safety information, warnings, and
procedures given in this manual and apply them to this particular application. Emerson or
its distribution partners can provide this training on request.

Knowledge of the safety information within this manual and its technically correct
implementation are prerequisites for danger-free installation, operation, and maintenance
of the analyzer.

1.7

Software version

The analyzer includes software that is used to control the operation of the analyzer. This
manual describes the software version as: 5.7.8.0 minimum.

Reference Manual

Plan

00809-0100-4244

January 2020

Reference Manual

17

«
...
15
16
17
18
19
...
»

Содержание Rosemount CT4400











































































































Отзывы:

Нет отзывов

Похожие инструкции для Rosemount CT4400

Бренд: Hanna Instruments Страницы: 2

Бренд: Hanna Instruments Страницы: 2

Бренд: Hammond Страницы: 16

Бренд: jenway Страницы: 50

Бренд: jenway Страницы: 62

Бренд: MADDALENA Страницы: 4

Бренд: Macnaught Страницы: 4

Бренд: Olympus Страницы: 362

Бренд: Olympus Страницы: 8

Бренд: Velleman Страницы: 96

Бренд: E Instruments Страницы: 2

Instrument Control System

Бренд: Opus-Two Страницы: 8

Signet FlowtraMag 2580 Series

Бренд: GF Страницы: 20

Бренд: Ocea Soft Страницы: 19

Бренд: Ansul Страницы: 24

Бренд: ENDA Страницы: 2

Бренд: Heinrichs Страницы: 31

Бренд: YOKOGAWA Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды