Emerson Rosemount CT4400 Скачать руководство пользователя страница 21

Страница: 21 / 106

1.9

Unpacking the analyzer

WARNING

HEAVY ITEM

Handle the analyzer with caution during unpacking, installing, maintaining, and
transporting to prevent crushing of hands, feet, or other body parts.

The analyzer weighs 33 lb (15 kg) for the half rack system and 66 lb (30 kg) for the full rack
system. Rosemount recommends that the analyzer is moved by a minimum of two people
when lifting and transporting the equipment.

Failure to properly handle the analyzer may cause injury to personnel, wear suitable
protective gloves and protective footwear.

Procedure

1. Visually inspect the packaging to ensure there has been no damage in transit or

storage.

2. Open the packaging and visually inspect the exterior of the analyzer for signs of

damage, corrosion, gas leaks, or signs of previous overheating if returning from
storage.

3. Report anything found to the maintenance organization.
4. Carefully lift the analyzer from the shipping container (handles are provided on the

full rack system to aid this process).

5. Place the analyzer on a flat, stable surface that can accommodate the weight (up to

66 lb [30 kg]). This step requires two people to lift and transport the analyzer.

Reference Manual

Plan

00809-0100-4244

January 2020

Reference Manual

Содержание Rosemount CT4400











































































































Результаты поиска

Содержание Rosemount CT4400

Отзывы:

Похожие инструкции для Rosemount CT4400

Бренды по названию

Популярные бренды

Emerson Rosemount CT4400, Справочное руководство

Результаты поиска

Содержание Rosemount CT4400

Отзывы:

Похожие инструкции для Rosemount CT4400

Бренды по названию

Популярные бренды