Emerson Copeland EazyCool ZXDI Series, Инструкции по применению

Страница: 43 / 70

C6.1.10/0118-0318/E 38
Parameters
Description Range Factory setting ZXDI
ZXDE ZXDI
A14 P4F Probe P4 calibration -12°C to 12°C 0 L2
A15 P5C Probe P5 configuration
Not used (0-NU)
Ambient temp (NTC10K)(1-AMT)
Thermostat temp (NTC10K)(2-TMT)
Vapour inlet temp (NTC10K)(3-UIT)
Vapour outlet temp (NTC10K)(4-UOT)
Evaporator temp (NTC10K)(5-EPT)
Liquid temp (NTC10K)(6-LLT)
Suction line temp (7-SLT)
Coil temp (8-COT)
Not used L2
A16 P5F Probe P5 calibration -12°C to 12°C 0 L2
A17 P6C Probe P6 configuration
Not used (0-NU)
Ambient temp (NTC10K)(1-AMT)
Thermostat temp (NTC10K)(2-TMT)
Vapour inlet temp (NTC10K)(3-UIT)
Vapour outlet temp (NTC10K)(4-UOT)
Evaporator temp (NTC10K)(5-EPT)
Liquid temp (NTC10K)(6-LLT)
Suction line temp (7-SLT)
Coil temp (8-COT)
Ambient temp
(NTC10K)
L2
A18 P6F Probe P6 calibration -12°C to 12°C 0.0 L2
A19 P7C Probe P7 configuration
Not used (0-NU)
Ambient temp (NTC10K)(1-AMT)
Thermostat temp (NTC10K)(2-TMT)
Vapour inlet temp (NTC10K)(3-UIT)
Vapour outlet temp (NTC10K)(4-UOT)
Evaporator temp (NTC10K)(5-EPT)
Liquid temp (NTC10K)(6-LLT)
Suction line temp (7-SLT)
Coil temp (8-COT)
Not used L2
A20 P7F Probe P7 calibration -12°C to 12°C 0 L2
A21 dPE Delay before activating probe error 0 to 255 sec 0 L2
B01 Unt Measurement unit for pressure Bar (0-BAR)
– PSI (1-PSI) – KPA (2-TPA)
bar L2
B02 CF Measurement unit for temperature °C (0-C) °C L2