42
43
CBD6601V
GB
TECHNICAL PROBLEMS
Problem
Possible cause
Solution
The dishwasher does not start.
The door is not fully closed.
Close the door.
The machine is not connected to
a power outlet.
Put the plug in a power outlet.
The machine is not turned on.
Press the ON button and select
a cycle.
The drain pump is not working
properly.
Overflow protection has been
triggered.
• Disconnect the machine from
the electricity mains.
• Disconnect from the water
supply.
• Ring a qualified technician.
GENERAL PROBLEMS
Problem
Possible cause
Solution
There is still dishwasher deter-
gent in the compartment when
the cycle has finished.
The detergent compartment was
still damp when the detergent
was added.
Before adding detergent, ensure
the compartment is dry.
The detergent compartment lid
does not close properly.
Detergent residues are clogging
the catch.
Clean the catch.
Knocking sounds in the dishwas-
her
A spray arm is knocking against
an object in the rack.
Pause the cycle and reposition
any objects that are interfering
with spray arm movement. See
the “Loading the dishwasher”
section.
There are marks on glassware
and cutlery.
The rinse-aid dose is too high.
Move the rinse-aid dispenser’s
dial to a lower setting.
Plates, cutlery and glassware
are not dry.
The rinse-aid dose may be too
low or the dispenser may be
almost empty.
Fill the dispenser, adjust the
rinse-aid dose to a higher setting
or change the brand of rinse
aid.
The chinaware was taken out of
the dishwasher too soon.
Let the chinaware stand in the
dishwasher until a loud noise is
heard.
TROUBLESHOOTING
Before ringing a service technician,
follow the troubleshooting guide.