32
33
CBD6601V
GB
Step 2: Selecting a salt dose
To select the correct dose for your water type, press the Start/Pause button repeatedly. Doses are shown in the
following order: H1
à
H2
à
H3
à
H4
à
H5
à
H6.
Step 3: End salt dose adjustment
If you do not do anything for five seconds, the machine switches from settings mode to stand-by mode. There
are 6 possible salt doses. Select as per the table below:
Water hardness
Salt dose setting
Shown on the display
dH
1)
mmol/l
2)
0-5
0-0,9
1
H1: Quick
6-11
1,0-2,0
2
12-17
2,1-3,0
3
H3: Glass and Quick
18-22
3,1-4,0
4 *
H4: ECO
23-34
4,1-6,1
5
H5: ECO and Quick
35-45
6,2-8,0
6
H6: ECO and Glass
Important!
1) German unit of water hardness.
2) Millimol per litre – international unit of water hardness.
*) Factory setting.
To find out the hardness of your water, contact your local water supplier.
B. FILL THE RINSE-AID DISPENSER
Rinse-aid dispenser
Rinse aid is released in the final rinse to prevent water droplets forming on the washing-up. Droplets that dry
out can leave marks and streaks. As it helps water to run off the washing-up, rinse aid also improves drying.
The dishwasher is designed to use liquid rinse aid. The rinse-aid dispenser is inside the door at the same
height as the detergent compartment. To fill the dispenser, open the door and pour rinse aid into the dispenser
until the level indicator is completely black.
The rinse-aid dispenser holds 110 ml.
Rinse-aid function
Rinse aid is added automatically in the final rinse. This ensures thorough rinsing and prevents marks and
streaks left by drying.