5
Functional description
Page 74
gas-lab
Q1
As this is always the message that has initially caused the beginning of the
centralized message, this information helps to analyse the error status. The
message text is blinking if no message has been accepted yet after the
beginning of the centralized message.
Below the
New message
menu item you can read off the most recent single
message of the group that has begun. As long as the centralized message
itself is pending the
New message
indication is updated upon each
beginning of a new message of the group. A
New message
, too, does not
stop blinking on the display before a message has been accepted after the
beginning of the new message.
Only if neither initial nor new message are indicated, a centralized message
is not pending.
Activate the
View
submenu to check the status of all single messages
contained in the group:
View
This display provides information on the single messages contained in
the group invoked before. Besides, it provides information on the status
of each contained single message. Due to the mass of information
there is always only one single message indicated on the display at a
time.
As the
Name
selection list contains all single messages of the
corresponding group you can switch to the indication of any other
single message of the currently selected group.
Name of the selected group
Currently indicated single message of the group. A list with
all messages existing in this group opens up if you press
the Enter key. You may also switch to the indication of
another single message of the group via this selection list.