GW-GNET+
6
gas-lab
Q1
Page 101
6.2 Importing and editing a parameterisation: Brief
description
You may read out the current parameterisation of a
gas-net
device via the data
interface and edit it afterwards.
The read-in process is implemented as follows:
1. Connect the PC and the evaluation computer by connecting the COM
interface of the computer to the DSS interface at the
gas-net
device using a
parameterisation cable.
2. Start GAS-
WORKS on your computer if you haven’t done so before.
Activate the communication program by clicking the
Import
– Data
interface
tool in the GW-BASE toolbar.
After having successfully started the communication program, you are
connected with the device as regards data technology. The window appearing
on your display contains some important basic device information.
3. Change to the
Content
tab now.
4. Mark the
Parameterisation
data record and click the lantern icon.
A
Save as
-dialog box appears asking for the file name under which the
data record shall be saved in GAS-WORKS.
After you have entered the name and confirmed your entry by clicking OK,
the reading in of the data will start.
5. After the reading in has been finished, close the communication program
via the main menu item
File
– Exit
.