elsner elektronik Salva KNX basic Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 74

background image

63

Temperature and humidity parameters

Smoke alarm Salva KNX

• Version: 09.09.2016 • Technical Changes and Errors excepted.

8.6.

Humidity threshold values

Activate the required air humidity threshold values. The menus for setting the th-
reshold values are displayed.

8.6.1. Threshold value 1, 2, 3, 4

Threshold value

Set, in which cases

threshold values and delay times

received via objects are to be

retained. The parameter is only taken into consideration if the setting via object is ac-
tivated below. Please note that the setting "After power supply restoration and pro-
gramming" should not be used for the initial start-up, as the factory settings are always
used until the first communication (setting via objects is ignored).

Set the threshold value directly in the application program using parameters, or define
them via the bus using a communication object.

Threshold value setting using parameter:

Set the threshold values and hysteresis directly.

Threshold value setting using a communication object:

Define, how the threshold value is to be received from the bus. Basically, a new value
can be received, or simply a command to increase or decrease.

During initial commissioning, a threshold value must be defined, which will be valid
until the first communication with a new threshold value. For units which have already
been taken into service, the last communicated threshold value can be used. Basically,
a humidity range is specified in which the threshold value can be changed (object value
limit).

A set threshold value will be retained until a new value or a change is transferred. The
current value is saved, so that it is retained in the event of a power supply failure and
will be available once the power supply is restored.

Use threshold value 1/2/3/4

Yes • No

Maintain the

threshold values and delays received via
communication objects

• never
• after power supply restoration
• after power supply restoration and
programming

Threshold value setting using

Parameter

• Communication objects

Threshold value in 0.1% RH

1 … 1000; 650

«
...
62
63
64
65
66
...
»

Содержание Salva KNX basic











































































Отзывы:

Нет отзывов

Похожие инструкции для Salva KNX basic

Бренд: First Alert Страницы: 5

Бренд: Kidde Страницы: 2

Бренд: Vector Страницы: 2

Бренд: Asante Страницы: 2

Бренд: Kidde Страницы: 11

Бренд: UNI Страницы: 62

Бренд: Geemarc Страницы: 32

Бренд: Audiovox Страницы: 38

Бренд: Trevi Страницы: 8

Бренд: Prestige Страницы: 32

Бренд: UltraFire Страницы: 2

Бренд: VESDA Страницы: 52

Бренд: Fusion Страницы: 8

Бренд: Vision Страницы: 3

Бренд: Eurochron Страницы: 8

Бренд: brennenstuhl Страницы: 84

Бренд: brennenstuhl Страницы: 108

Бренд: Code Alarm Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды