Elnec DATAMAN-40PRO, Руководство пользователя

Страница: 98 / 162

Split serial number
The option allows dividing serial number into individual bytes and placing the bytes at each
Nth address of buffer. This feature is particularly useful for SQTP serialization mode for
Microchip PIC devices when the device serial number can be the part of program memory as
group of RETLW or NOP instructions. For more information see Example 2 shown in
Examples section below.
Following split options are available:
•
Check box Split serial number – turns on/off split function
•
Split gap – specifies number of bytes placed between split serial number fragments
•
S/N fragment size – serial number is split into fragments with size specified by this
option
Example:
Example 1:
Write serial numbers to AT29C040 devices at address 7FFFAH, size of serial number is 4
bytes, start value is 16000000H, incremental step is 1, the serial number form is binary and
least significant byte is placed at the lower address of serial number in device.
To make above described serialization following settings have to be set in Serialization
dialog:
Mode: Incremental mode
S/N size: 4 bytes
S/N mode:: Bin
Style: Hex
Save to buffer: LS Byte first
Address: 7FFFCH
Start value: 16000000H
Step: 1
Following values will be written to device:
The 1st device
Address Data
007FFF0 xx xx xx xx xx xx xx xx xx xx xx xx 00 00 00 16
The 2nd device
Address Data
007FFF0 xx xx xx xx xx xx xx xx xx xx xx xx 01 00 00 16
The 3rd device
Address Data
007FFF0 xx xx xx xx xx xx xx xx xx xx xx xx 02 00 00 16
etc.
”xx” mean user data programmed to device
Serial numbers are written to device from address 7FFFCH to address 7FFFFH because
serial number size is 4 bytes.
Example 2:
Following example shows usage of SQTP serialization mode when serial number is split into
RETLW instructions for Microchip PIC16F628 devices.
98