Elnec DATAMAN-40PRO, Руководство пользователя

Страница: 17 / 162

DATAMAN-448PRO2
Introduction
DATAMAN-448PRO2 is very fast universal 4x 48-pindrive concurrent multiprogramming
system designed for high volume production programming with minimal operator effort. The
chips are programmed at near theoretical maximum programming speed.
DATAMAN-448PRO2
consist of four independent isolated universal programming modules,
based on the DATAMAN-48PRO2 programmer hardware. Therefore the sockets can run
asynchronously (concurrent programming mode). Each programming module starts
programming at the moment the chip is detected to be inserted in the socket properly -
independently on the status of other programming modules. It result three programming
modules works while you replace the programmed chip at the fourth.
Modular construction of hardware - the programming modules works independently - allows
for continuing operation when a part of the circuit becomes inoperable. It also makes service
quick and easy.
Hands-free operation: asynchronous and concurrent operation allows a chip to begin
programming immediately upon insertion of a chip. The operator merely removes the finished
chip and inserts a new chip. Operator training is therefore minimized...
DATAMAN-448PRO2 support all kinds of types and silicon technologies of today and
tomorrow programmable devices without family-specific module. You can be sure the next
devices support require the software update and (if necessary) simple package converter
(programming adapter), therefore the ownership cost are minimized.
Using built-in in-circuit serial programming ( ISP ) connector, the programmer is able to
program ISP capable chips in circuit.
DATAMAN-448PRO2
provide very competitive price coupled with excellent hardware design
for reliable programming. It has probably best "value for money" programmer in this class.
DATAMAN-448PRO2 provide very fast programming due to high-speed FPGA driven
hardware and execution of time-critical routines inside of the programmer. It is at least so fast
than competitors in this category, for many chips much faster than most competitors. As a
result, when used in production this programmer waits for an operator, and not the other way
round.
DATAMAN-448PRO2 interfaces with the IBM PC/compatible, portable or desktop personal
computers through USB (2.0) port.
DATAMAN-448PRO2 provides a banana jack for ESD wrist straps connection to easy-to-
implement the ESD protection control and also other banana jack for earth wire.
FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down
and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-
speed circuitry to deliver signals without overshoot or ground bounce for all supported
devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of
today's advanced low-voltage devices.
17