Elnec DATAMAN-40PRO, Руководство пользователя

Страница: 142 / 162

•
If the checkbox is checked, the project file for Site #1 will be used also for all other
Programmer Sites. In this mode all Sites are using the same shared buffer of project data
and program the same device type.
•
If the checkbox is not checked, each Site will use its own project file defined by name in
table of Sites in column Project file. In this mode each Site is using its own buffer of
project data, which allows to program different data to different types of devices at the
same time in each Site.
Checkbox Automatic YES!
Automatic YES! checkbox - when checked, Automatic YES! is set on for all programmers. For
more details about Automatic YES! feature see Programmer / Automatic YES. This feature
may not be available for some types of programmers.
Panel Timer refresh rate settings
Timer refresh rate defines how often the PG4UWMC program will request status information
from running Programmer Sites. Status information means current device operation type,
progress, result and so on. Current status information is displayed in main window of
PG4UWMC. The default timer refresh rate value is 200ms. If you wish faster refresh of status
information displayed in Operation panel of PG4UWMC, select shorter refresh interval. If you
notice the system performance slow down, when using faster refresh, select higher refresh
value to make refresh less often. On the Pentium 4 computers there is almost no
performance penalty depending on timer refresh rate but on slower computers it is sometimes
useful to select longer (less often) timer interval.
Panel Log file settings are used to set mode of using Log file report
Log file is text file containing information about PG4UWMC control program operation flow,
which means information about loading project files, device operation types and device
operation results. Multiprogramming system generates few of Log files. One main Log file of
program PG4UWMC and Log files for each of running Programmer Sites. Each Site has its
own one Log file. The name of Site's Log file has the same prefix as the name of Log file
specified in edit box Log file. The file name prefix is followed by the number of Site in the form
of _#<Snum>.
Example:
142