Elnec DATAMAN-40PRO, Руководство пользователя

Страница: 28 / 162

•
configuration and security bit program
•
illegal bit test
•
checksum
•
interpret the Jam Standard Test and Programming Language (STAPL), JEDEC standard
JESD-71
•
interpret the VME files compressed binary variation of SVF files
•
security
•
insertion test, reverse insertion check
•
contact check
•
ID byte check
•
special
•
production mode (automatic start immediately after device insertion)
•
lot of serialization modes (more type of incremental modes, from-file mode, custom
generator mode)
•
statistic
•
count-down mode
Buffer operations
•
view/edit, find/replace
•
fill/copy, move, byte swap, word/dword split
•
checksum (byte, word)
•
print
File load/save
•
no download time because programmer is PC controlled
•
automatic file type identification/recognition
Supported file formats
•
unformatted (raw) binary
•
HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX,
ASCII HEX
•
Altera POF, JEDEC (ver. 3.0.A), e.g. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD
PLD, PLD Designer ISDATA, etc.
•
JAM (JEDEC STAPL Format), JBC (Jam STAPL Byte Code), STAPL (STAPL File)
JEDEC standard JESD-71
•
VME (ispVME file VME2.0/VME3.0)
•
SVF (Serial Vector Format revision E)
•
STP (Actel STAPL file)
GENERAL
•
supply voltage AC 100-240V, max. 1.2A, 50-60Hz
•
power consumption max. 60W active
•
dimensions 361x234x56 mm (14.2x9.2x2.2 inch)
•
weight (programmer) 3.5kg (7.7 lb)
•
operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)
•
operating humidity 20%..80%, non condensing
28