Quality from Tradition; Technology of Tomorrow
mbC:\DB-pdf\BedAnl\Modulgrav\-GB-300102.doc
21
4. Step
Push the copying pin back into the guiding
bushing.
Place the head of the copying pin into parking
position in the centre of the template (1).
5. Step
Move the hinged fork down as far as it will go
(see Step 1) (1).
Position the stretching device in the centre of
the recess at the fork (2).
Fix the stretching device by means of the two
grub screws in the fork (3).
Ensure that the device is positioned exactly at
the centre of the recess.
Caution: Tighten the two grub screws only until
the module is fixed without lateral play.
(sluggishness of the hinged arm)
6. Step
Retighten the two locknuts on the fastening
screws (2).
How to adjust the stretching device
The letter stretching device is now ready for
use.
To select the degree of letter stretching use the
turning knob (1) and open the clamping lever
(2).
Move the stretching device into the required
direction on the guiding bushing:
Upper stop: no stretching
Lower stop: maximum stretching
After adjustment fix the stretching device.
1
1
2
3
3
2
2
1
2
