Quality from Tradition; Technology of Tomorrow
mbC:\DB-pdf\BedAnl\Modulgrav\-GB-300102.doc
19
7.Step
Fix the 0-position (1) with the
miller height fine adjustment (2).
Press the button on the mouse
and simultaneously turn the black
knob (2) carefully until the tip of
the miller touches the surface of
the work piece.
Selecting the engraving depth:
Press mouse button and turn the
knob (2) clockwise. The interval
between 2 numbers corresponds
to 0.1 mm)
8.Step
Turn the miller on and adjust it to
the correct speed (see table:
Milling Speed). Put the tracer (2)
on the first letter of the word and
start milling. While tracing the
letters, the mouse lever (1) must
be activated. When replacing the
tracer (2), let go of the mouse
lever (1).
1
2
1
2
