Quality from Tradition; Technology of Tomorrow
mbC:\DB-pdf\BedAnl\Modulgrav\-GB-300102.doc
11
Ring-Inside Engraving with Ring-Inside Module
Preparation
Ring-inside module (1),
2 grip screws (2),
the limit stop (3),
1 Allan key
are available.
1.Step
Put tracer (1) to park position.
2. Step
Loosen clamping lever (1) at the
diamond holder case and push
module (2) to the height of the
column mark (3) with other
hand.
Retighten clamping lever (1).
Put chisel back.
3. Step
Fix the limit stop (1) at the mark
on the chisel holder (2) and lock
with the srew.
4. Step
Loosen clamping lever (1) at the
type height adjustment and
position fork (3) at the required
type height (2) with thumb.
Retighten clamping lever (1).
2
3
4
1
1
3
2
1
2
1
1
2
3
