Elitech NANODUCT 1030, Руководство пользователя

Страница: 68 / 71

68
Recommended separation distances between portable and mobile RF communications equipment and the
Nanoduct System
The Nanoduct is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the operator of the Nanoduct can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the
Nanoduct as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
(Watts)
Minimum separation distance (m) between portable and mobile RF
communications equipment and the Nanoduct system.
150 kHz to 80 MHz
d(m)= 1.2 √P
80 MHz to 800 MHz
d(m)= 1.2 √P
800 MHz to 2.7 GHz
d(m)= 2.3 √P
.01 Watts Maximum .1 m .1 m .2 m
.1 Watts Maximum .4 m .4 m .7 m
.5 W Maximum
(typical mobile phone)
.8 m .8 m 1.6 m (mobile phone)
1 Watts Maximum 1.2 m 1.2 m 2.3 m
10 Watts Maximum 3.7 m 3.7 m 7.4 m
100 Watts Maximum 11.7 m 11.7 m 23.3 m
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Appendix J: Electromagnetic Compatibility (EMC)