ELGA PURELAB Ultra Mk 2 Scientific Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 54

background image

PURELAB Ultra Mk2

Operator Manual

ELGA

Page 48

PURELAB Ultra Mk 2 Version 3 11/08

12. WARRANTY/CONDITIONS OF SALE

ELGA LabWater is a trading name of VWS (UK) Ltd.

General Limited Warranty

VWS (UK) Ltd warrants the products manufactured by it
against defects in materials and workmanship when used in
accordance with applicable instructions for a period of one
year from the date of shipment for the products. MAKES NO
OTHER WARRANTY, EXPRESSED OR IMPLIED. THERE
IS NO WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. The warranty provided
herein and the data, specifications and descriptions of the
VWS (UK) Ltd products appearing in VWS (UK) Ltd’s
published catalogues and product literature may not be
altered except by express written agreement signed by an
officer of VWS (UK) Ltd. Representations, oral or written,
which are inconsistent with this warranty or such publications
are not authorized and, if given, should not be relied upon.

In the event of a breach of the foregoing warranty, VWS (UK)
Ltd sole obligation shall be to repair or replace, at its option,
any product or part thereof that proves to be defective in
materials or workmanship within the warranty period,
provided the customer notifies VWS (UK) Ltd promptly of any
such defect. The exclusive remedy provided herein shall not
be deemed to have failed of its essential purpose so long as
VWS (UK) Ltd is willing and able to repair or replace any
nonconforming VWS (UK) Ltd product or part. VWS (UK) Ltd
shall not be liable for consequential, incidental, special or any
other indirect damages resulting from economic loss or
property damage sustained by any customer from the use of
its products.

VWS (UK) LTD Warranty

VWS (UK) Ltd warrants the water systems manufactured by
it, BUT EXCLUDING MEMBRANES AND CARTRIDGES,
against defects in materials and workmanship when used in
accordance with the applicable instructions and within the
operating conditions specified for the systems for a period of
one year from the earlier of:

a) the date of installation, or
b) the

120

th

day following the date of shipment.

VWS (UK) LTD MAKES NO OTHER WARRANTY,
EXPRESSED OR IMPLIED. THERE IS NO WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. The warranty provided herein and the data,
specifications and descriptions of the VWS (UK) Ltd systems
appearing in VWS (UK) Ltd published catalogues and
product literature may not be altered except by express
written agreement signed by an officer of VWS (UK) Ltd.
Representations, oral or written, which are inconsistent with
this warranty or such publications are not authorised and, if
given, should not be relied upon.

«
...
50
51
52
53
54
»

Содержание PURELAB Ultra Mk 2 Scientific























































Отзывы:

Нет отзывов

Похожие инструкции для PURELAB Ultra Mk 2 Scientific

Бренд: Yamato Страницы: 53

Бренд: Rain Bird Страницы: 96

Бренд: Waters Страницы: 116

Бренд: Sierra Страницы: 11

Бренд: Atlas Copco Страницы: 116

NEVERCOLD 70600

Бренд: EASTMAN Страницы: 11

Бренд: USFilter Страницы: 77

Бренд: PurePro Страницы: 4

Бренд: Waldbeck Страницы: 17

SWIMCLEAR C3030EURO

Бренд: Hayward Страницы: 69

Infinity Hydroxy

Бренд: Osmio Страницы: 49

Бренд: Weh Страницы: 68

Бренд: Water Care Страницы: 20

Бренд: BRÖTJE Страницы: 36

Бренд: 3P Technik Страницы: 4

Бренд: Weltek Страницы: 4

Бренд: Toro Страницы: 4

Бренд: 123Filter Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды