FUEL BED LAYOUT
Pebble Effect Option
1. Refer back to section 12.0 - Fuel bed layout
(coal effect option) and follow steps 1 and 2.
The front strips and fuel effect matrix used for
pebble effect versions are of the same design
as coal effect versions, but have a different
surface finish.
2. Open the bag of 22 ceramic pebbles. All of
these pebbles are the same size. Take five
pebbles and place them as shown. Care
should be taken to ensure that the pebbles
bridge the gap between the front strip and the
six supports at the front of the matrix. Care
should also be taken not to push the pebbles
right down between the supports, as this can
affect the flame picture when the appliance is
running.
3. Take five more ceramic pebbles and posi-
tion as shown to form the ‘second row’ of the
fuel effect. The pebbles may be rotated as
desired to fit into the gaps between the sup-
ports in order to create a random, realistic
effect. Again, remember not to push the peb-
bles down too far into the valleys between the
supports as this can have a detrimental effect
to the flame picture.
4. Now take another six pebbles and place
behind the second row of coals, as shown. The
pebbles may be orientated as desired to
achieve a realistic effect. Keep the spacing
between the pebbles even and uniform.
10
12.1
©
2009 Focal Point Fires plc.
