CLEANING (continued)
FIREFRAME - The magnetic frame may be removed for cleaning if required. A wipe with a dry cloth
is normally sufficient, but on stains it is permissible to use a damp cloth with a mild household
cleaner, followed by a wipe with a dry cloth. DO NOT use abrasive cleaners as these may damage
the finish. To re-assemble ensure the magnets are in place on the firebox frame, and re-fit to the
firebox.
FIREFRONT - Any dust accumulating in the firefront may be removed using a vacuum cleaner or
dry cloth. Heavy stains may be removed by using a damp cloth and mild household detergent.
Brass parts of the firefront may be cleaned using a suitable brass cleaner. Replace the front cen-
trally against the fire after cleaning.
PAINTED AREAS - These can be cleaned using a dry cloth.
COALS AND CERAMICS - See the relevant section in the Installation Guide of these instructions. Do
not create dust from the coals. Clean gently in the open air. Replace components with original
spares only as necessary.
LIST OF SPARES
PART NO.
ITEM
F550012
Pack of 22 ceramic coals
F550013
Pack of 22 ceramic pebbles
F550110
Fuel Matrix & L+R front pieces (coal version)
F550111
Fuel Matrix & L+R front pieces (pebble version)
F730006
Pilot unit
F930017
Remote control (handset only)
Please Enquire
Decorative Frame
Please Enquire
Decorative Front
4
9.0
8.0
As our policy is one of continuous improvement and development , we hope therefore you will understand we must retain the right to amend details and/or spec-
ifications without prior notice.
©
2009 Focal Point Fires plc.
F860628
[1] GB - Gas Safe
TM
registered operatives (Northern Ireland only- CORGI registered operatives) are the only class of person considered as competent by the HSE under the
Gas Safety (Installation and Use) Regulations 1998.
