3. Install the terminal block.
Install the terminal block to the monitor main unit, and tighten the left and right clamp screws using a
flat-head screwdriver with tip width of 2.5 mm (recommended torque: 0.2 N·m to 0.3 N·m).
Terminal block
Electrical wire
Electrical wire
Flat-head screwdriver
Tighten
Terminal block
●
Using the AC power connector
1. Remove the insulation cover from the AC power connector.
2. Connect the power cord to the AC power connector.
Ensure that the power plug is secured.
3.
Connect the power cord to the power outlet.
Power cord
Attention
• Do not remove the insulation cover if you do not use the AC power connector.
5.
Bundle the cables with a cable tie to prevent disconnection.
Attention
•
Make sure to secure cords and cables (AC power cords, USB cables, HDMI cables) that are not non-slip.
• Cable ties are not provided with this product. Please prepare separately.
Cable tie holder
Cable tie
English
19
Chapter 2 Installation / Connection
