Problem
Possible cause and remedy
5. Calibration does not work
correctly.
•
Hold down
for two seconds or more to perform touch panel
sensitivity adjustment. Do not touch the touch panel until the
message "Don't touch the panel. Calibrating..." disappears from the
screen.
•
Perform touch panel sensitivity adjustment using TPOffset.
•
Readjust the touch panel to the original state (by clicking "Reset"
in the "Display" tab of the "Tablet PC Settings" window accessible
from the Windows Control Panel) and then calibrate the touch panel
again.
•
When using PbyP display, install DMT-DD and configure necessary
settings. For more information, see “3-3. Using DMT-DD” (page
26).
6. No touch sound is heard.
• If you have set touch sound to be output through the audio output
terminal of the PC, connect speakers.
•
Install DMT-DD and configure necessary settings. For details, refer
to the DMT-DD User’s Manual (in the CD-ROM).
• Touch sound cannot be heard when Windows standard driver is
used.
Attention
•
For details on TPOffset (software used to adjust the sensitivity of the touch panel), see the TPOffset User’s
Manual (in the CD-ROM).
34
Chapter 4 Troubleshooting
