Eizo ColorNavigator, Руководство пользователя

Страница: 15 / 53

2. HOW TO CALIBRATE THE MONITOR
15
7
Proceed calibration
The measurement window appears on the screen.
Tilt the LCD panel up slightly and attach the measurement device to the measurement window.
(Refer to the user’s manual of the measurement device)
Proceed with calibration in accordance with the instruction on the message window.
ColorNavigator sequentially shows some patterns for calibrating the monitor. Calibration takes
approximately 3 minutes.
NOTE
•
When performing the calibration, the monitor automatically switches to the CAL mode (i.e.
Calibration mode). The calibration result is only registered in CAL mode. (The result is not
registered in other modes.)
•
The figure displayed in this window, depends on the type of measurement device connected to
the computer.
Progress bars are displayed on the right-bottom corner while adjustment is in progress.
Message display area:
Instructions or any software
messages will be displayed
while the adjustment is in
progress.
Progress chart:
The chart shows the status
of adjustment.
Level display chart :
The present adjustment
status is plotted in the
chart.The red cross line
means the target and the
black cross line indicates
the present status.
Brightness bar:
The present brightness level
is shown in the brightness
bar. The target brightness
level is marked in red.